TARC Supplies
The American Rocketry Challenge (TARC) is an annual rocketry contest for youth in grades 6 through 12. Teams compete each year for hundreds of thousands of dollars in scholarships, and a chance to travel to the Paris Air Show to compete for the United States! The challenge is different each year, but Rocketry Works has the supplies you'll need to succeed!
- Adhesives
- Bulkheads
- Centering Rings
- Fins and Fin Material
- Nose Cones
- Recovery Gear
- Tools
- Transitions
- Tubes
-
Plywood Bulkhead for 3 Inch Plastic Nose Cone
Rocketry Works
$4.99Great for addressing the difficulties fitting a parachute into short, squat 3 inch diameter rockets like the Big Daddy, this 1/8 inch thick bulkhead fits inside a 3 inch diameter blow molded nose cone, and you can use it to anchor a 1/4-20 eye hook for...RW-BULKHEAD 73MM PW 3MM$4.99 -
3D Printed Bidirectional Transition for BT-70 and BT-80 with Avionics Bay
Rocketry Works
$18.99New for 2023! We've upgraded our 3D printed transition design to work equally well in either direction--large end forward or small end forward. This makes it a great component for TARC 2024 rules, which require a smaller payload tube than the...RW-TRANS-BI-BT-70-BT-80-AV-BAY$18.99 -
29mm Heavy Wall LOC - 40mm (BT-60) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube in a 40mm ID (BT-60) airframe tube. The fit on the motor tube is snug, so some light sanding may be needed...RW-CR-29MM HW LOC/ BT-60 PW 1/8 IN$1.99 -
29mm Heavy Wall LOC - 56mm (BT-70) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube inside a 56mm (BT-70) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for shock...RW-CR-29MM-HW-LOC-BT-70-PW-3MM$1.99 -
29mm Heavy Wall LOC - 66mm (BT-80) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount LOC Precision's 29mm heavy wall motor tube inside a 66mm (BT-80) airframe tube. Rocketry Works' unique perforation pattern allows users to knock out holes for...RW-CR-29MM-HW-LOC-BT-80-PW-3MM$1.99 -
3D Printed PNC-60KS Altimeter Bay Nose Cone
Rocketry Works
$5.99This nose cone is an 4.15 inch (10.5 cm) long 3D printed ABS plastic ogive nose cone for BT-60 body tubes. It's a 2 piece nose cone with vents for accurate barometric altimeter measurements--the shoulder and nose cone separate with quick release plastic...RW-PNC-60KS-ALT$5.99 -
Dual Horizontal Flexible Foam Egg Protector for BT-80
Rocketry Works
$16.99Protect fragile egg payloads with these lightweight flexible foam paylaod protectors. The egg-shaped cavity fits eggs matching the TARC egg specification perfectly, and the longitudinal access makes accessing dual horizontal egg payloads quick. This...RW-PP-BT-80-FLEX-FOAM-HOR$16.99 -
3D Printed PNC-75mm-KS Nose Cone
Rocketry Works
$14.99This custom 3D printed ABS plastic ogive nose cone is up to 8 inches (20.3 cm) long for 3 inch body tubes. Note that there are a variety of "3 inch" body tubes available, each with slightly different outside and inside diameters. To better fit your...RW-3DP-PNC-75MM-KS$14.99 -
3D Printed PNC-60K Nose Cone
Rocketry Works
$3.99This nose cone is an 5.25 inch (13.3 cm) long 3D printed ABS plastic ogive nose cone for BT-60 body tubes. It's a 2 piece nose cone--shoulder and nose cone that glues together with epoxy. at 1.6mm thick walls, it's a sturdy nose cone. Typically, fliers...RW-PNC-60K$3.99 -
1/4 inch thick Custom Centering Rings (per ring)
Rocketry Works
$7.99We'll cut your custom plywood centering rings for you! Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the difference in motor tube and airframe diameter is no larger...RW-CR-CUSTOM-1-4$7.99 -
1/8 inch thick Custom Centering Rings (per ring)
Rocketry Works
$5.99We'll cut your custom plywood centering rings for you! Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the difference in motor tube and airframe diameter is less than 3...RW-CR-CUSTOM-1-8$5.99 -
29mm Heavy Wall - 40mm (BT-60) Centering Rings (2)
Rocketry Works
$1.99These laser cut centering rings are made from 1/8 inch birch plywood, and sized to mount Aerotech's 29mm heavy wall motor tube in a 40mm ID (BT-60) airframe tube. The fit on the motor tube is snug, so some light sanding may be needed. Sold as a set...RW-CR-29MM HW / BT-60 PW 1/8 IN$1.99