Building Supplies
Whether you need to replace parts on a damaged model, or build your own model rocket from scratch, Rocketry Works has the supplies you need.
- Body Tubes
- Display Stands
- Motor Tubes
- Tail Cones
- Transitions
- Couplers
- Bulkheads
- Centering Rings
- Nose Cones
- Recovery Gear
- Payloads
- Rail Buttons & Launch Lugs
- Motor Retention
- Fins
- Plywood and Balsa Sheets
- Tools
-
Custom Centering Rings (per ring)
Rocketry Works
$5.99We'll cut your custom plywood centering rings for you! Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the difference in motor tube and airframe diameter is less than 3...RW-CR-CUSTOM$5.99 -
Replacement T-nut for 1010 Rail Buttons
Rocketry Works
$0.49Replacement T-nut for Rocketry Works' 1010 rail button. Includes one standard T-nut to fit Rocketry Works' 1010 rail buttons. Features a knurled threaded section for better grip when tightening against the inside of the airframe.RW-RB-1010-T-NUT$0.49 -
Replacement Hex Nut for 1010 Rail Buttons
Rocketry Works
$0.49Replacement hex nut for Rocketry Works' 1010 rail button. Includes one steel 8-32 hex nut to fit Rocketry Works' 1010 rail buttons.RW-RB-1010-HEX-NUT$0.49 -
Replacement Bolt for 1010 Rail Buttons
Rocketry Works
$0.99Replacement bolt for Rocketry Works' 1010 rail button. It is a stainless steel, 6-32 button head phillips bolt.RW-RB-1010-BOLT$0.99 -
Custom Length Tube
Rocketry Works
$3.99Rocketry Works can cut tubes for you to any length less than 34 inches, and we can optionally cut 3 or 4 1/8 inch slots in the airframe to your specifications.RW-TUBE-CUSTOM-CUT$3.99 -
Bull Pup fins for BT-80 (Set of 8)
Rocketry Works
$7.99These upscale Bull Pup fins fit a 17.5 inch long BT-80 airframe tube to produce a nice scale model of the Bull Pup air to surface missile from the late 1960s. Through the Wall fins require a slotted airframe tube to secure the fin tab to the motor tube...RW-FIN-BULL-PUP-3MM-PLY-TTW-29MM-66MM$7.99 -
Tail Cone for 29mm in BT-80
Rocketry Works
$5.99This ABS plastic tail cone includes an aft centering ring for a 29mm thin wall motor mount and 4 1/8 inch slots to allow through-the wall fins. Some sanding of the centering ring and the fin slots may be required. The 3D printed surface sticks CA glue,...$5.99 -
Tube Slotting and Cutting Guide
Rocketry Works
$15.99Cut your own slots for 1/8 inch thick through-the-wall fins in cardboard airframe tubes with this sturdy plastic tube slotting guide! It's also useful as a tube cutting guide, helping you cut straight cuts perpendicular to the tube. Works directly...RW-TUBE-SLOT-GUIDE$15.99 -
29mm Conformal 1010 Rail Guides (1 pair)
Rocketry Works
$5.99Rocketry Works designed these 3D printed conformal rail guides for minimum diameter 29mm rockets. The 3D printed texture on the ABS plastic is perfect for securely epoxying these rail guides to a rough-sanded portion of the airframe tube. 2...RW-RG-1010-29MM-CONFORMAL$5.99 -
HAMR Motor Retainer
Public Missiles Ltd.
$28.95A perfect fit for PML motor tubes, their HAMR motor retainers integrate nicely with PML kits. They secure composite motors nicely in the motor tube and allow you to quickly change motors with a simple twist of the retainer. Manufacturer instructions are...PML-HAMR29-SET$28.95 -
Custom Plywood Fins
Rocketry Works
$9.99This product is used for custom quoted fin orders after consultation with Rocketry Works staff. For new custom fin orders, please use these links: https://www.rocketryworks.com/custom-plywood-fins-1-8-inch-thick/ https://www.rocketryworks...RW-CUSTOM-FIN$9.99 -
Flexible Foam Egg Protector for BT-80
Rocketry Works
$8.99Protect fragile egg payloads with these lightweight flexible foam paylaod protectors. The egg-shaped cavity in the middle fits eggs matching the TARC egg specification perfectly, and the equatorial access reduces time to load and unload vertically...RW-PP-BT-80-FLEX-FOAM$8.99