Building Supplies
Whether you need to replace parts on a damaged model, or build your own model rocket from scratch, Rocketry Works has the supplies you need.
- Body Tubes
- Display Stands
- Motor Tubes
- Tail Cones
- Transitions
- Couplers
- Bulkheads
- Centering Rings
- Nose Cones
- Recovery Gear
- Payloads
- Rail Buttons & Launch Lugs
- Motor Retention
- Fins
- Plywood and Balsa Sheets
- Tools
-
Madcow Squat Fins 4 inch x 54mm x 1/4 inch
Rocketry Works
$6.99These 1/4 inch birch plywood fins for the Madcow Rocketry Squat 4 inch with a 54mm motor mount.RW-FIN-SQUAT-4IN-54MM-PLY-6MM$6.99 -
3D Printed PNC-2065 Nose Cone for 2 Inch Tubes
Rocketry Works
$7.99This nose cone is a 6.5 inch (16.1 cm) long 3D printed ABS plastic ogive nose cone for 2 inch body tubes. The shoulder includes a shock cord attachment strut. The 3D printed texture can be smoothed out with some wood filler and sanding. This nose...RW-3DP-PNC-2065$7.99 -
3D Printed PNC-70AJ Nose Cone
Rocketry Works
$6.99Type a description for this product here...RW-3DP-PNC-70AJ$6.99 -
3D Printed PNC-70K Nose Cone
Rocketry Works
$7.99This nose cone is an 5.5 inch (14 cm) long 3D printed ABS plastic ogive nose cone for BT-70 body tubes. It can be used for TARC teams, or for general hobby rocket construction. The shoulder includes a shock cord attachment strut. The 3D printed...RW-3DP-PNC-70K$7.99 -
1/4 inch thick Custom Centering Rings (per ring)
Rocketry Works
$7.99We'll cut your custom plywood centering rings for you! Supported materials include 1/8 inch or 1/4 inch birch plywood. 1/8 inch ply is suitable for mid power applications where the difference in motor tube and airframe diameter is no larger...RW-CR-CUSTOM-1-4$7.99 -
3D Printed PNC-80K Nose Cone
Rocketry Works
$9.99This nose cone is an 8.25 inch (21.2 cm) long 3D printed ABS plastic ogive nose cone for BT-80 body tubes. It can be used for TARC teams, or for general hobby rocket construction. The nose cone is sturdy at 1.6mm thick, and comes in 2 parts--the...RW-3DP-PNC-80K$9.99 -
Custom Plywood Fins 1/4 Inch Thick
Rocketry Works
$7.88Rocketry Works can cut your design into 1/4 inch thick plywood fins for you! Simply upload your fin pattern, and we can cut your fins to your specifications! Vector artwork files are best delivered in Lighburn .lbrn or Adobe...RW-CUSTOM-FIN-PLY-1-4$7.88 -
Custom 3D Printed Nose Cone
Rocketry Works
$8.99Custom 3D printed nose cone, subject to quote from Rocketry Works. Typically, these nose cones are smaller than 3 inches in diameter. Contact us to discuss details. 520 405 3009RW-PNC-CUSTOM$8.99 -
Horizontal Rocket Display Stand
Rocketry Works
$7.99This elegant laser cut display stand glues together in a couple minutes, and is a great way to display a rocket horizontally on a shelf, table, or desk--especially rockets with fins that don't allow you to stand the rocket upright. The stand...RW-STAND-HORIZONTAL$7.99 -
3D Printed 24mm Payload Nose Cone
Rocketry Works
$9.99Designed to allow flights of Jolly Logic altimeters in 24mm diameter airframes like the Rocketry Works Socrates or Toobish kits, this 3D printed ABS nose cone fits in an 24mm (BT-50) body tube and attaches to the shock cord just like a typical nose cone...RW-NC-24-ALTIMETER-PAYLOAD$9.99 -
3D Printed 18mm to 24mm Payload Nose Cone
Rocketry Works
$6.99Designed to allow flights of Jolly Logic altimeters in 18mm diameter airframes like the Viking, this 3D printed ABS nose cone fits in an 18mm body tube and attaches to the shock cord just like a typical nose cone. But this nose cone flares out to...RW-NC-18-24-ALTIMETER-PAYLOAD$6.99 -
Flexible Foam Egg Protector for BT-70
Rocketry Works
$8.99Protect fragile egg payloads with these lightweight flexible foam paylaod protectors. The egg-shaped cavity in the middle fits eggs matching the TARC egg specification perfectly, and the equatorial access reduces time to load and unload vertically...RW-PP-BT-70-FLEX-FOAM$8.99